document number: 31516 revision 06-aug-02 www.vishay.com 62 mdm 14, mdm 16 vishay dale for technical questions, contact: ff2aresistors@vishay.com features ? mil-prf-83401 qualified ? epoxy molded construction ? all device leads are hot-solder dipped ? available in tube pack ? tcr available in "k" ( 100ppm/ c) or "m" ( 300ppm/ c) depending on style ? 100% screen tested per group a, subgroup 1 of mil-prf- 83401 ? all devices are capable of passing the mil-std-202, method 210, condition d, "resistance to soldering heat" test thick film resistor networks military, mil-prf-83401 qualified, type rz dual-in-line package, 01, 03, 05 schematics model/ schematic resistor package resistance standard temperature weight pin no./ power rating power rating range tolerance coefficient** profile max. @ 70 c max. @ 25 c (- 55 c to + 125 c) ww ? %g mdm 14 01 0.10 1.30 10 - 1m 1, 2, 5 k, m 1.3 mdm 14 03 0.20 1.40 10 - 1m 1, 2, 5 k, m 1.3 mdm 14 05 0.05 1.20 consult 1, 2, 5 k, m 1.3 factory mdm 16 01 0.10 1.50 10 - 1m 1, 2, 5 k, m 1.5 mdm 16 03 0.20 1.60 10 - 1m 1, 2, 5 k, m 1.5 mdm 16 05 0.05 1.40 consult 1, 2, 5 k, m 1.5 factory * k = 100ppm/ c; m = 300ppm/ c standard electrical specifications parameter unit mdm series maximum operating voltage vdc 100 voltage coefficient of resistance v eff < 50ppm dielectric strength vac 200 per min. insulation resistance ? 10,000m operating temperature range c - 55 to + 125 storage temperature range c - 55 to + 150 technical specifications marking resistance permanency testing per mil- to solvents: prf-83401. solderability: per mil-prf-83401. body: molded epoxy. terminals: copper alloy, hot-solder dipped. mechanical specification
www.vishay.com 63 mdm 14, mdm 16 vishay dale document number: 31516 revision 06-aug-02 for technical questions, contact: ff2aresistors@vishay.com type a b c MDM14 0.750 [19.05] 0.600 [15.24] 6 mdm16 0.850 [21.59] 0.700 [17.78] 7 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] 0.250 0.005 [6.35 0.127] 0.290 min. 0.320 nom. 0.360 max. [7.37 min. 8.13 nom. 9.14 max.] 0.310 0.010 [7.87 0.254] pin #1 identification pin #1 a 0.010 [0.254] 0.100 0.010 [2.54 0.254] 0.075 0.015 [1.90 0.381] non-accumulative tol. "c" spaces 0.120 0.005 [3.05 0.127] 0.050 0.005 [1.27 0.127] 0.018 0.003 [0.457 0.076] b 0.010 [0.254] 0.130 + 0.015 - 0.005 [3.30 + 0.381 - 0.127] dimensions in inches [millimeters] example: m8340101ka001gj = a dual-in-line resistor network with 14 pins, a tcr of 100ppm/ c, r1 resistance value of 82 ohm, r2 resistance value of 130 ohm, tolerance of 2% and to schematic "j". example: m8340101m2201gb = a dual-in-line resistor network with 14 pins, a tcr of 300ppm/ c, resistance value of 2.2k ohm, tolerance of 2% and to schematic "b". * schematic "j" resistance values are specified by a 4-digit code, which comes from mil-r-83401. the codes and corresponding resistance values are: example: m8340102m4701ga = a dual-in-line resistor network with 16 pins, a tcr of 300ppm c, resistance value of 4.7k ohm, tolerance of 2% and to schematic "a". ordering information - military part number m8340101 m8340102 m8340101 detail spec. no. m8340101 = 14 pin dip rz010 m8340102 = 16 pin dip rz020 "k" = 100ppm/ c "m" = 300ppm/ c m m k characteristic 2201 4701 a001* resistance value the first three digits are significant figures. the last digit specifies the number of zeros to follow = 01 and 03 schematics. for 05 schematic see footnote (*). b a j schematic f = 1% g = 2% j = 5% g g g tolerance code a001 a002 a003 a004 a005 a006 a007 a008 a009 r1 (ohms) 82 120 130 160 180 180 220 220 330 r1 (ohms) 130 200 210 260 240 390 270 330 390 code a010 a011 a012 a013 a014 a015 a016 a017 a018 r1 (ohms) 330 330 1.5k 3k 180 270 560 560 620 r1 (ohms) 470 680 3.3k 6.2k 270 270 560 1.2k 2.7k thick film resistor networks, military, mil-prf-83401 -type rz typ 0.030 (0.762)
document number: 31516 revision 06-aug-02 www.vishay.com 64 mdm 14, mdm 16 vishay dale for technical questions, contact: ff2aresistors@vishay.com MDM14-01 (m8340101xxxxxxb) mdm16-01 (m8340102xxxxxxb) 13 or 15 resistors with one pin common the mdmxx-01 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. commonly used in the following applications: mos/rom pull-up/pull-down ttl input pull-down open collector pull-up digital pulse squaring "wired or" pull-up ttl unused gate pull-up power driven pull-up high speed parallel pull-up MDM14-03 (m8340101xxxxxxa) mdm16-03 (m8340102xxxxxxa) 7 or 8 isolated resistors the mdmxx-03 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. commonly used in the following applications: "wired or" pull-up long-line impedance balancing power driven pull-up led current limiting power gate pull-up ecl output pull-down line termination ttl input pull-down MDM14-03 pin #1 MDM14-05 (m8340101xxxxxxj) mdm16-05 (m8340102xxxxxxj) 12 or 14 resistor pairs the mdmxx-05 provides the user with a choice of 12 or 14 pairs of r1/r2 resistor values for pulse squaring and ttl dual-line terminating requirements. MDM14-05, mdm16-05 MDM14-01 01 schematic 03 schematic 05 schematic mdm16-01 pin #1 pin #1 circuit applications mdm16-03 r1 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r2 r2 r2 r2 r2 r2 r2 r1 r1 r1 r1 r1 r1 r1 r2 thick film resistor networks, military, mil-prf-83401-type rz - 55 + 25 + 70 + 125 + 150 - 55 + 25 + 70 + 125 + 150 1.40 1.20 1.00 0.05 1.50 1.30 1.00 0.10 power rating (watts) 01 schematic 05 schematic 03 schematic derating ambient temperature c - 55 + 25 + 70 + 125 + 150 1.60 1.40 1.00 0.20 mdm 16 mdm 14 single resistor single resistor single resistor mdm 16 mdm 14 mdm 16 mdm 14 power rating (watts) power rating (watts) ambient temperature c ambient temperature c
www.vishay.com 65 mdm 14, mdm 16 vishay dale document number: 31516 revision 06-aug-02 for technical questions, contact: ff2aresistors@vishay.com max. ? r (typical test lots) 0.50% ? r 0.50% ? r 0.25% ? r (char. k) 0.50% ? r (char. m) 0.25% ? r (char. k) 0.50% ? r (char. m) 0.50% ? r 0.25% ? r 0.25% ? r 0.25% ? r 0.50% ? r (char. k) 2.00% ? r (char. m) 0.25% ? r performance test power conditioning thermal shock short time overload low temperature operation moisture resistance resistance to soldering heat shock vibration load life terminal strength insulation resistance dielectric withstanding voltage thick film resistor networks, military, mil-prf-83401-type rz conditions 1.5 x rated power, applied 1.5 hours on and 0.5 hour off for 100 hours 4 hours at + 25 c ambient temperature 5 cycles between - 65 c and + 125 c 2.5 x rated working voltage 5 seconds 45 minutes at full rated working voltage at - 65 c 240 hours with humidity ranging from 80% rh to 98% rh leads immersed in + 260 c solder to within 1/16" of body for 10 seconds total of 18 shocks at 100 g's 12 hours at maximum of 20 g's between 10 and 2,000 hz 1,000 hours at + 70 c, rated power applied 1.5 hours on, 0.5 hour off for full 1000 hour period 4.5 pound pull for 30 seconds 10,000 megohm (minimum) no evidence of arcing or damage (200 v rms for 1 minute)
|
